Cable Router
How to connect ethernet cable from a router to a 7 year old Dell pc whose port is small-can only connect phone?
I need to connect yellow ethernet cable from my broadband router to my 7 year old Dell PC.Problem is ethernet cable’s jack seems bigger than the network port of my PC.
That’s because you’re trying to connect to an analog modem, not to an Ethernet NIC. What you are trying to plug in to is an old-style dial-up modem. What you need for your router is an Ethernet network interface card.
Don’t be discouraged, though… you can always add a network card to your computer and they’re pretty darned inexpensive too.
Here’s what you need… and it’s under $10:
http://www.newegg.com/Product/Product.aspx?Item=N82E16833127102
Or one you could find at a local BestBuy… under $20:
http://www.bestbuy.com/site/olspage.jsp?skuId=8350802&st=network+interface+card&lp=2&type=product&cp=1&id=1177112858465
As long as you have an open PCI slot inside your Dell PC, you should be good to go. Install this card, follow the directions to install the drivers and software, and then you’ll be able to connect directly from your broadband router to this new network card you just installed.
Good luck… post back if you have any questions!
Cisco Crossover Cable for Router Connections
|
|
Porter Cable 43925PC No-Drip Edge Router Bit with 1/2″ Shank and Carbide-Tipped $14.95 |
|
|
porter cable 3102 router power unit $102.50 |
|
|
porter cable 3102 router power unit $102.50 |
|
|
Router Mounting Plate For Porter Cable $97.99 |
|
|
Porter Cable 891 2-1/4 Peak HP GripVac Router $218.60 |
|
|
Porter Cable Plunge Router Base ONLY Model 6911 $53.00 |
|
|
15 Pc 1/4″ Shank Carbide Tip Router Bit Kit w/ Wood Case Fits Porter Cable Bosch $32.00 |
|
|
Porter Cable 1-3/4 HP Fixed Base Router Model # 690LR Type 2 $75.00 |
|
|
Craftsman 6 Piece Clear Router Plunge Sub-Base Combo Bosch Porter Cable Dewalt $22.95 |
|
|
PORTER CABLE 2907650PC TONGUE AND GROOVE ASSEMBLY ROUTER BIT 1/2 INCH $7.77 |
|
|
4 New Porter Cable 43717 Carbide Tipped 1/4″ Router Bits $14.99 |
|
|
Porter-Cable 690LR 11-Amp Fixed-Base Router $75.00 |
|
|
Porter Cable 690LR Heavy Duty Fixed Base Router Base Model 1001-T2 w/Case USED $79.99 |
|
|
PORTER CABLE ROUTER MODEL 690 LR $23.49 |
|
|
Porter Cable 43334PC Bevel Laminate Trimming Router Bit 22º 2 Flute 1/2″ Shank $14.00 |
|
|
PORTER CABLE VARIABLE SPEED HEAVY DUTY PLUNGE ROUTER 7529 $76.00 |
|
|
Brass Router Template Guide For Porter Cable Routers $49.95 |
|
|
PORTER CABLE 1 3/4 HP ROUTER W/ FIXED AND PLUNGE BASES $215.69 |
|
|
Porter-Cable 43082PC 3/8″ 3-Wing Rabbeting Carbide Tipped Router Bit $16.50 |
|
|
PORTER CABLE 691 ROUTER:6912 1¾ HP/11A Type 7 Motor & 6911 D-Handle Router Base $46.00 |
|
|
Porter Cable 43072PC 45° Carbide Chamfer Router Bit 1/4″ Shank 1/4″ Fillet $22.50 |
|
|
Porter Cable 43425PC 1/4-Inch Roundover Forming Carbide Tip Router Bit $18.00 |
|
|
Porter Cable 43051PC 3/16″ Straight Double Flute Plunge Cutting Router Bit $9.00 |
|
|
NEW Porter Cable 42000 Router Templet Guide Kit $25.00 |
|
|
Porter Cable 43333PC 5/8″ Straight Double Flute Plunge Cutting Router Bit $9.00 |
|
|
Dovetail Jig Router Porter Cable 7116 Omnijig 24-inch Machine NEW!!!!!! $529.00 |
|
|
Carrying Case for Porter Cable 690 Router $14.99 |
|
|
Porter Cable 42186 Router Sub Base Plate $2.00 |
|
|
Porter Cable 43182PC 1/2″ Laminate Flush Trim Router Bit 1/2 Shank $8.00 |
|
|
Porter Cable 1/4″ Router $35.00 |
|
|
Porter Cable 7538 Speedmatic 3-1/4 HP Production Router $429.80 |
|
|
Porter Cable 77240 24 Inch Omnijig Dovetail Jig Joinery System for Router 14358 $287.00 |
|
|
PORTER CABLE 2907650PC TONGUE AND GROOVE ASSEMBLY ROUTER BIT 1/2 INCH $8.01 |
|
|
Porter Cable 693pk, Freud router bits, template guide and accesories $300.00 |
|
|
Porter Cable Router Model 6902 with Base model 1001 $64.00 |
|
|
Porter Cable 6912 Type 4 Router & 82902 Base Runs ~missing collet $25.00 |
|
|
Porter Cable Router Kit Model # 693lrpk set 1 $149.99 |
|
|
Porter Cable Router Guide Model #42160 $15.99 |
|
|
Porter Cable PCRBS05 5 pc Router bit set wood box NEW! $39.97 |
|
|
Porter Cable router base $28.00 |
|
|
Porter-Cable 690LR 11-Amp Fixed-Base Router $80.00 |
|
|
Porter Cable 43767PC Double Roman Ogee Router Bit *K41 $14.00 |
|
|
Porter Cable 696 router table and 6912 Router $85.00 |
|
|
Porter Cable 43334PC 22 Degree Bevel Laminate Trim Carbide Tip Router Bit NEW $16.29 |
|
|
Porter Cable 43543PC Cove & Bead Face Molding 2 Flute Forming Router Bit NEW $32.87 |
|
|
Porter Cable 43539PC Forming Triple Bead 2 Flute Router Bit with 1/2″ Shank NEW $21.50 |
|
|
Porter Cable 43102PC 1/4″ Radius Carbide Tipped Cove Router Bit NEW 1/4″ Shank $12.73 |
|
|
Porter Cable 43936PC 15 Deg Solid Surface Topmount Bowl Forming Router Bit NEW $11.88 |
|
|
Porter Cable Speedtronic Router $150.00 |
|
|
Porter Cable 43788PC Cove Horizontal Panel Raiser Cabinet Router Bit NEW $44.91 |
|
|
Porter Cable 43565PC Inset Door Edge Cabinet Router Bit NEW 1/2″ Shank $59.97 |
|
|
Porter Cable 43578PC 3/8″ Beading Router Bit 1/2″ Shank NEW $34.97 |
|
|
Porter Cable 43763PC Double Roman Ogee Forming Router Bit 3/4″ Flute NEW $24.97 |
|
|
Vintage Porter Cable Router 1002 Motor 1001 Base Works Good 22,000 RPM $20.50 |
|
|
PORTER CABLE 43838PC 7/16″ STRAIGHT ROUTER BIT $15.29 |
|
|
Porter Cable 43534PC Bull Nose 17/64″ Radius Carbide Router Bit USA 1/2″ shank $14.97 |
|
|
PORTER CABLE 2907650PC TONGUE AND GROOVE ASSEMBLY ROUTER BIT 1/2 INCH $0.99 |
|
|
PORTER CABLE 43188PC 5/8″ UNDERSIZE PLYWOOD ROUTER BIT $21.24 |
|
|
Porter-Cable Standard Router Edge Guide 42160 Free Shipping New In Package $15.49 |
|
|
PORTER CABLE TRIM ROUTER W/12 BITS $85.95 |
|
|
Porter Cable 43490PC Chardonay Ogee Vertical Panel Raiser Cabinet Router Bit NEW $69.97 |
|
|
Porter Cable Model 75361 1/2″ router $51.00 |
|
|
Porter Cable 43174PC 7/32″ Bead Radius Classical Router Bit NEW 1/2″ Shank $18.23 |
|
|
14 assorted 1/4″ shank router bits. Freud, Woodtek, Bosch and Porter Cable $16.66 |
|
|
Porter Cable 42984PC 60 Deg 1/2″ V-Groove Router Bit NEW 1/4″ Shank $27.71 |
|
|
Porter Cable 43561PC 3/8″ Tongue Ogee Rail Cabinet Door Router Bit 1/2″ Shank $49.95 |
|
|
Porter Cable 690LR Heavy Duty Fixed Base Router Base Model 1001-T2 w/Case USED $51.00 |
|
|
Porter Cable 43720PC 1/2″ Straight Double Flute Plunge Cutting Router Bit $15.00 |
|
|
Porter Cable 43082PC 3/8 Carbide 3 Flute Rabbeting Router Bit 1/4″ Shank NEW NIB $12.73 |
|
|
NEW Porter Cable 1/4″ STRAIGHT Router Bit 43718PC FREE SHIP! 1/4″ Shank $15.95 |
|
|
Porter Cable 43533PC 9/64″ Radius Bull Nose Forming Router Bit NEW 1/4″ Shank $58.97 |
|
|
2-Pack Porter Cable 43320PC USA 5/8 Laminate Flush Trim Carbide Router Bit 1/4″ $14.97 |
|
|
Porter Cable 43545PC Traditional Vertical Panel Raiser Cabinet Router Bit NEW $36.97 |
|
|
Porter-Cable 43751PC Classical Router Bit* $12.00 |
|
|
Porter Cable 43292PC 3/4 Inch Pattern Cutting Router Bit 1/2″ Shank *K $10.00 |
|
|
Porter-Cable 693LRPK 1-3/4 HP Fixed Router Plunge Kit $220.00 |
|
|
Porter Cable Router Fixed Base Model 1001 $19.00 |
|
|
Black Decker/ Porter Cable 690LR 1-3/4HP DIECAST ROUTER $195.24 |
|
|
10 Assorted Router Bits Porter Cable Roman Ogee more $19.99 |
|
|
Bench Dog 40-150 Router Lift & Porter Cable 7518 Router $599.00 |
|
|
Incra Mast-R-Lift II Router Lift & Porter Cable 7518 $629.00 |
|
|
Porter Cable 7518 15A 3-1/4HP V.S. Router $329.00 |
|
|
Porter-Cable 7518 3-1/4 HP Fixed Base 5-Speed Woodworking Router Tool $178.50 |
|
|
MICROPROCESSOR CONTROLED PORTER CABLE SPEEDTRONIC 1/2″ PROFESSIONAL ROUTER #5182 $174.99 |
|
|
Porter Cable 43532PC Carbide Tipped 3-Wing Slotting Cutter Router Bit $3.99 |
|
|
Porter-Cable 7310 5.6 Amp 3/4-Horsepower Laminate Trim Router $60.00 |
|
|
PORTER CABLE 1/4″ COLLET SLEEVE – # 43002 ROUTER BIT BITS LAMINATE TRIMMER $9.99 |
|
|
Black Decker/ Porter Cable 693LRPK 1-3/4HP PLUNG ROUTER KIT $261.14 |
|
|
NEW Porter Cable 42188 Clear Router Sub Base; Center Ho $19.99 |
|
|
NEW Porter Cable 42160 Standard Router Edge Guide $19.99 |
|
|
NEW Porter Cable 42690 Precision Router Edge Guide $44.99 |
|
|
Porter Cable Router Base Heavy Duty Wood Working Tool $45.00 |
|
|
Black Decker/ Porter Cable 691 1-3/4HP D-HANDLE ROUTER $235.28 |
|
|
Porter Cable 43049PC 1/2″ Single Cut Straight Router Bit 1/2″ Shank $7.00 |
|
|
Porter Cable 43215PC 1/2 Combination Panel Pilot Router Bit Two Flute 1/2″ Shank $12.00 |
|
|
Porter Cable 43062PC 7/8 Straight 2 Flute Plunge Cutting Router Bit 1/2″ Shank $8.50 |
|
|
Porter Cable 43204PC 3/8 Straight 2 Flute Plunge Cutting Router Bit 1/2″ Shank $7.50 |
|
|
Porter Cable 430S3PC 31/64 Straight 2 Flute Plunge Cutting Router Bit 1/2″ Shank $8.50 |
|
|
Porter Cable 43078PC 1/2 Shank 1″ V-Groove Router Bit 1/2″ Shank $13.00 |
|
|
Porter Cable 43422PC 1/8-inch Roundover Router Bit 1/2″ Shank $11.50 |
|
|
Slim Line Sink Front Tray – Almond $28.99 An excellent solution for minimum clearance applications. Ideal for solid surface counter tops with integrated bowl sinks. Requires only 1-11/16″ clearance! The 36″ tray can be cut to specifications. Includes 4 spring tensions hinges…. |
|
|
SMC SMC7008BR Cable/DSL Router with 8 Port Switch $249.95 Designed for small to midsized offices, the SMC cable/DSL router combines a multifunctional broadband router with a seven-port 10/100 Mbps dual-speed switch, a built-in print server, an RS232 COM port for modem connections, and an Internet firewall for extra security. A WAN port along with Network Address Translation (NAT) extend simultaneous Internet access for up to 253 PCs on a LAN. The router… |
|
|
Netgear FR314 Cable/DSL Firewall Router with Integrated 4-Port 10/100 Switch $245.00 Netgear’s FR314 cable/DSL Internet gateway firewall router offers integrated, hardware-based firewall protection specifically designed for sharing high-speed Internet connections in the home and small office. Designed with denial-of-service attack-prevention technology, it delivers business-level security to the home network including real-time e-mail alerts of any hacking attempt. It also pr… |
|
|
Cisco-Linksys BEFSRU31 EtherFast Cable/DSL Router with USB & 3-Port 10/100 Switch $294.00 The Linksys EtherFast cable/DSL router with USB and three-port 10/100 switch lets you connect your desktop or notebook PC to your router easily with a USB cable–without installing a network card. Configurable as a DHCP server, this router protects networks of up to 253 users with its NAT firewall. You can manage and modify your router’s network with IP filtering, forwarding, and DMZ hosting…. |
|
|
Wireless IP Pan/Tilt/ Night Vision Internet Surveillance Camera Built-in Microphone With Phone remote monitoring support(Black) $46.88 Specs: Image Compression Format: M-JPEG standard Image Resolution: VGA(640×480) / QVGA(320×240) Sensor: 1/4 inch CMOS, 300,000 Pixels Light frequency: 50Hz, 60Hz or Outdoor Audio compression: ADPCM Data rate: 802.11b: 11Mbps (Max.), 802.11g: 54Mbps (Max.) Ethernet: One 10/100Mbps RJ-45 Viewing angle: 67? Horizontal Rotating Angle: 0~270? Vertical Rotating Angle: 0~120? Alarm Mode: motion detection… |
|
|
Belkin 12-Outlet Home/Office Surge Protector with Phone/Ethernet/Coaxial Protection and Extended Cord $18.79 Amazon.com Product Description .caption { font-family: Verdana, Helvetica neue, Arial, serif; font-size: 10px; font-weight: bold; font-style: italic; } ul.indent { list-style: inside disc; text-indent: 20px; } table.callout { font-family: Verdana, Helvetica, Arial, serif; margin: 10px; width: 250; } td.callout { height: 100%; background: #9DC4D8 url(http://images.amazon.com/images/G/01/electroni… |
|
|
Bench Dog 10-035 Bench Cookie Work Grippers, 4-Pack $9.96 Bench Dog Bench Cookie work grippers are versatile, non-slip bench pads that lift, grip, and protect your work. With their high-friction rubber surfaces and durable cores, they prevent projects from slipping as you plane, sand, carve, assemble, and more. They can also elevate your work, providing clearance for routing or finishing jobs. Available in packs of four, these convenient accessories are … |
|
|
12 Volt, 7 Ah Sealed Lead Acid Battery with F2 Terminals $12.99 Sealed Maintenance Free: The valve regulated, spill-proof construction of this battery allows trouble-free, safe operation in any position. There is no need to add electrolyte, as gases generated during charging are recombined in a unique “oxygen cycle”. Long Service Life: Long Shelf Life: |
|
|
Tripp Lite APS2012 2000W 12V DC to AC Inverter with Automatic Line-to-Battery 100/25-Amp Charger $1,089.00 Tripp Lite APS2012 PWRINV APS 2012 2000W 12VDC HWIRE… |
|
|
5V and 8.4V Rechargeable Lithium-ion Mini Battery Pack – PM85-25 $89.95 Small size, High capacity, Long Run Time. This battery has 25 Watt-hour (Wh) capacity. For your reference and comparison, most Digital Cameras/Video Camcorder’s standard batteries only have 5Wh capacity. A typical cell phone battery capacity is only about 3Wh, a iPhone internal battery capacity is around 5Wh. This may help calculating your expected run time when you use this battery for your devic… |
September 5th, 2007 in
Tools | tags: cable router, cable router modem, cable router modem combo, cable router reviews, cable router wireless, howto, network, networking, router, wireless
