Circular Saw Blade

Choosing The Right Circular Saw Blade

You can have a top of the line circular saw but without a good blade it doesn’t amount to much. Having the right blade for the job you are doing is critical to making a clean cut and making the cut safely. Depending on the material you are cutting and the results you are looking for you have to choose a blade for your circular saw accordingly.

Generally the blade will be a standard 7-1/4″ in diameter. You can get general purpose blades for under $10 but to get a high quality blade you can expect to pay $50, $75 or more.

When choosing a blade I prefer to have a thin-kerf blade since it is easier to make a cut (kerf refers to the width of the cutting teeth). I also inspect the blade to make sure there are no chips in the carbide teeth. Running your finger nail along the edge of the blade will reveal any pits that you cannot see.

The blade and teeth should have no rust and be smooth and shiny. A dirty blade requires more force to make a cut which will result in a rough cut or cause an injury. Any dirty blades should be cleaned by using an industrial cleaner. This will dissolve any pitch or gummy substances left from cutting wood.

Different circular saw blades and their uses

Masonry Blade
A masonry blade is smooth with no teeth. This is because it grinds material away rather then cuts it. When using a masonry blade you should always wear a dust mask to prevent inhaling and hazardous substances. Masonry blades are ideal for scoring concrete pavers or cutting bricks.

Plywood Blade
Ideal for cutting cabinet grade plywood or plywood with a thin veneer, plywood blades nibble away the wood rather then chew it up like a general purpose blade. A plywood blade has a lot more teeth then other types of circular saw blades, often over 70 teeth. This makes for a very clean cut with no chip-out.

Chisel Tooth Blades
These types of blades are what usually come with a low to mid range circular saw. They often have only steel teeth which cut very well when sharp but are easily dulled. They are seldom used by professional since they do not maintain their cutting edge.

Trim Blades
Primarily for finishing cuts, a trim blade has 40 to 60 teeth, each with a premium carbide tip. A trim blade cuts slower then a general purpose blade but leaves a smooth sharp edge. They are ideal for cross cutting dimensional lumber and cutting plywood.

Decking Blades
Used for trimming off decking and other premium dimensional stock a decking blade has a thin kerf with a raised shoulder. This allows it to easily cut through even the hardest pressure treated lumber or knots in cedar or teak. Most decking blades also have a radial slot which reduces warping while cutting and prevents deep saw marks.

Remodeling Blades
These blades are primarily used for demolition work. They have far less teeth then a finishing or decking blade, often as few as 10 or 12. The teeth are also very robust with square shoulders and a wide kerf. It is ideal for rough cutting and cuts where nails and other debris could be present. Since this type of blade is so aggressive there is a lot of chip out. Avoid using a remodeling blade on finishing type cuts.

General Purpose Blade
This blade is used for most general cutting. Almost every circular saw will have a general purpose blade included with it. They are great for ripping or cross-cutting but do have some tear-out so should be avoided with finishing cuts. General purpose blades will usually have 20 teeth with carbide tips and cut smoothly when sharp.

Cutting with a circular saw is one of the most common ways to rip and cross-cut lumber and plywood. However there is always a risk of kick-back. Set the depth of the blade so it is just slightly deeper then the thickness of your stock. This will reduce the risk of kick-back and other injuries.

About the Author

Accurate Woodworking Plans
provides wood working plans,
wood tools
and how to information for beginner, intermediate and advance wood workers.

How to Sharpen Tools : Sharpening a Circular Saw Blade

Freud 10″ Premier Fusion Circular Saw Blade P410T $82.99

Freud 12″ 60T Diablo Metal Circular Saw Blade D1260F $98.99

Freud 8 1/4″ 24T Diablo Circular Saw Blade D0824X $22.99

Freud 7 1/4″ 60T Diablo Circular Saw Blade D0760A 10Pk $179.99

Freud 6 1/2″ 48T Diablo Metal Circular Saw Blade D0648F $52.99

Rockwell RK3431K 7 1/4″ Contractor Laser Circular Saw (4″Blade, 15 AMP) $99.99

**DeWalt DC390 XRP 18V Cordless CIRCULAR Saw WITH Battery & Blade** $89.99

Hitech 7″ metal cutting circular saw, with blade. $50.00

TASK 7 1/4″ circular saw blade NAIL BITER w/ 14 tungsten carbide teeth $2.99

Mini Saw Blade Saw Mirco Saw Cut Off Saw Disc Dremel Saw Blade Saw Circular Mini $17.00

TASK 7 1/4″ Diamond Tooth, Fibre Cement Cutting, Circular Saw Blade $9.99

Dewalt Corded Circle Circular Saw DW369 with ELECTRIC BRAKE (7 1/4″ blade) $59.99

MAKITA 3-3/8″ CORDLESS CIRCULAR SAW SH01 W/ EXTRA BLADE BRAND NEW $69.00

Porter Cable 18V 6 1/2″ Circular Saw Cordless Wood Cutting PC186CS Blade Manual $29.99

Circular Cutting Ceramic Crack Chaser Saw Blade 107mm $9.29

2 DIAMOND 7-1/4″ SAW BLADES FITS BOSCH CIRCULAR SAW $9.99

NEW UNUSED SKIL 5995 18VOLT CORDLESS CIRCULAR SAW WITH NEW BLADE $25.99

Pack of (3) IRWIN 15130 Framing/Ripping Circular Saw Blades 7-1/4″ $5.99

(25blades) 7-1/4″ X 24t CIRCULAR SAW BLADE THIN KERF,FRAMING, RIP/CROSS CUT $115.00

Ryobi W200S circular saw, 16 1/4″ beam saw, carbide blade, used, NR $63.00

SKIL CIRCULAR SAW + 6pc 7-1/4″ x 24T Carbide Blades $79.95

PORTER CABLE 18V 6-1/2″ CORDLESS CIRCULAR SAW New w/Blade PC186CS $19.99

SKIL 3510-02 New Hand Held Wet Tile Circular Saw Skil Warranty w/ Diamond Blade $81.49

5 DEWALT 5-3/8 CARBIDE CORDLESS CIRCULAR SAW BLADES 16T $10.50

2 VA BY BOSCH 12″ TITANIUM CIRCULAR TABLE MITER SAW BLADES 30T CARBIDE TOOTH $3.75

5 DEWALT 5-3/8 CARBIDE CORDLESS CIRCULAR SAW BLADES 16T $26.99

10 DEWALT 5-3/8 CARBIDE CORDLESS CIRCULAR SAW BLADE 16T $46.99

50 DEWALT 5-3/8 CARBIDE CORDLESS CIRCULAR SAW BLADE 16T $174.99

5 DEWALT 5-3/8 CARBIDE CORDLESS CIRCULAR SAW BLADES 16T $6.50

New 3 pc 7-1/4″ X 24 Tooth Carbide Circular Saw Blade $5.38

2 12″ 80T Circular Table Miter Saw Blades Carbide Tip $44.99

Woodworking 4″ Diameter 30 Toothed Circular Saw Blade $5.96

DEWALT CIRCULAR SAW BLADE FOR CORDLESS SAWS 5 3/8″16T NEW 2 COUNT $9.99

NEW 10″ CIRCULAR SAW BLADE $9.99

NEW DEWALT DW3106P5 2PK SET 10 INCH CIRCULAR SAW BLADE $30.99

30 Teeth 20mm Inner Dia Wood Cutting Circular Saw Blade $6.91

180mm Diameter 40T Wood Cutting Circular TCT Saw Blade $15.01

8000 RPM Speed Circular Saw Blade Disc for Wood Cutting $15.17

Wood Cutting 40 Teeth 4″ Outside Dia Circular Saw Blade $9.71

40 Tooth 110mm Wood Cutting Circular TCT Saw Blade $7.95

9″ OD 40 Teeth Wood Cutting Circular Saw Blade Disc $26.07

Lumber Cutter 12000 RPM Revolution Circular Saw Blade $6.48

Makita a-90934 5″ Diamond Wet-Cut Circular Saw Blade $41.64

NICHOLSON 9 inch circular saw blade MADE IN USA $10.00

6 1/2 INCH CIRCULAR SAW BLADES LOT OF 5 MADE IN USA $18.50

6 INCH CIRCULAR SAW BLADES LOT OF 5 MADE IN USA $20.00

6 1/2 INCH CIRCULAR SAW BLADES LOT OF 5 MADE IN USA $18.50

72T 60mm OD 1mm Thick HSS Circular Blade Slitting Saw $5.39

New 4 Inch Wet Tile Granite Marble Circular Saw w Blade $48.48

Lumber Cutter 4″ Diameter 40 Toothed Circular Saw Blade $6.38

Skil 10″ x 60 Tooth Carbide Circular Saw Blade 75160 $12.00

LOT OF ~2~ DEWALT 7-1/4″ 18 TOOTH CARBIDE CIRCULAR SAW BLADES ~NEW~ $11.99

3 Diamond Oscillating Tool Circular Saw Blades: Mastercraft, Fein, Bosch, Dremel $19.99

30 Teeth 20mm Inner Dia Wood Cutting Circular Saw Blade $6.72

Vermont American 7 1/4″ Plywood 150 teeth Saw Blade Circular Saw NEW IN PKG. $0.99

dewalt construction 5 3/8 saw blade circular carbide 30 tooth aulminum cutting $5.00

dewalt construction 5 3/8 saw blade circular carbide 30 tooth aulminum cutting $5.00

GripTight 7-1/4″ 24T Thin Kerf Circular Saw Blade $4.95

New GripTight 7-1/4″ 24T Circular Saw Blade $4.95

Wood Cutting 5000rpm 7 Inch Diameter Circular Saw Blade $16.00

5 NEW Circular saw blades King Canada Ultra Thin Carbide Blade 7-7 1/4″ 24 Tooth $9.99

8000 RPM 7″ x 40T Circular Saw Blade for Wood Cutting $13.81

New, Bare Tool DeWALT 6 1/2″ Cordless Circular Saw DC390 18V XRP with blade $89.99

Irwin Marathon Circular Saw Blade-8 1/4in Dia 24 Tooth #14050 $15.00

Wood Cutting 20mm Dia Arbor 40T Circular Saw Blade Tool $6.95

Carpenter 9″ OD 60 Teeth 6000 RPM Circular Saw Blade $23.58

Tenryu MP-25580CB 10-inch Carbide Tipped Circular Saw Blade $83.99

Black & Decker Two-Pack – 7 1/4″ Circular Saw Blades – NIP $9.99

3 Mini Circular Saw Blades 2 inch Diameter Wood Blade 7/16 arbor hole New Cut Sa $8.97

Silver Tone 8 Segment Marble Circular Saw Blade 108mm $7.71

DEWALT DW3106 10″ 60 T FINE CROSSCUT CIRCULAR SAW BLADE $39.99

6 DEWALT DW3106 10″ 60T CROSSCUT CIRCULAR SAW BLADES $210.99

Ryobi 18 Volt 18V Cordless Circular Saw Model P506 w/ Laser Guide Includes Blade $49.99

FREUD D1472F 14″ 72T FERROUS METAL CIRCULAR SAW BLADE $124.99

CRAFTSMAN NEXTEC LITHIUM ION 12 V CIRCULAR SAW 3- 3/8 IN. BLADE 61325 SAW ONLY $25.00

3 Diablo 7-1/4 in. x 24 Tooth Carbide Circular Saw Blade D0724A NEW $27.00

9 Inch 40 Tooth Wood Cutting TCT Circular Saw Blade $19.27

Wood Cutting 40-Toothed 7″ Diameter Circular Saw Blade $12.81

72T 60mm OD 1mm Thick HSS Circular Blade Slitting Saw $5.26

3 Diablo 7-1/4 in. x 24 Tooth Carbide Circular Saw Blade D0724A NEW $27.00

LOT of 2 Craftsman Kromedge Dado Set Circular Saw Blades & Accessories $6.49

Vintage Black & Decker Circular Saw 7301 71/4″ Blade. Runs Good! See Video! $15.00

120 VOLT CIRCULAR SAW BLADE SHARPENER TADD $3.25

CIRCULAR SAW BLADE 18″, 100-TOOTH ALTERNATING TOOTH BEVEL, 1″ ARBOR. $50.00

120 VOLT CIRCULAR SAW BLADE SHARPENER TADD $2.25

Oldham (3)Finishing and (1)Woodworking 7 1/4 inch Circular Saw Blades (4 Blades) $39.99

RYOBI Cordless Circular Saw With NO Battery. With Carrying Bag and Extra Blade $69.00

180mm Diameter 40T Wood Cutting Circular TCT Saw Blade $14.38

EVOLUTION FURY 2 355MM TCT CIRCULAR SAW BLADE MULTI PURPOSE STEEL WOOD $72.68

IRWIN 14025 7-1/4″ Marathon Cordless Circular Saw Blade $5.50

Circular Cutting Ceramic Crack Chaser Saw Blade 107mm $7.80

Makita 24T Circular Saw Blade_7 1/4″_New $4.99

DADO SAW BLADES 2 -6 ” circular and 7 dado blades “ROC-EDGE” $16.99

CMT 215.050.10 10″ 50T Carbide Tipped Combination Circular Saw Blade NEW w/Case $55.99

CMT 210.096.12 12″ 96T Fine Cut-Off Circular Saw Blade f/ Two-sided Melamine NEW $91.32

CMT 213.040.10 10″ 40T ATB Carbide-Tipped Circular Saw Blade General Purpose NEW $49.59

4 1/2″ Circular Saw Blade 30 Carbide Teeth New in Pack! $16.56

Vermont American 6-1/2″ 20 TPI Fast-Cut Rip Carbide Circular Saw Blades 27167 $11.99

5 10″MASTER MECHANIC CIRCULAR TABLE MITER SAW BLADE 44T $34.99

Vermont American MASONRY 6 1/2 inch Abrasive Saw Blade Circular Saw NEW IN PKG. $0.99

Fred and Friends PIBOSS Pizza Boss Pizza Wheel $9.60 Pizza Cutter Circular Saw – Pizza Pro 3000Real men want a real pizza cutter – show your pizza who is boss with this fantastic Pizza Pro3000.Are those rubbish knives and girly pizza utensils getting in the way of your manly status? The Pizza Cutter Circular Saw is the answer! Pizza Pro 3000 is a circular saw shaped pizza cutter, ideal for your favourite Italian flatbread. Try it on peshwari naan’s,…

Pizza Boss 3000 – Novelty Kitchen Tool Circular Saw for Slicing Food $11.97 Great gift for the pizza boss! Show that pizza who’s boss with a cutter designed like a circular saw! It slices through pizza like it’s a mere 2 by 4! What a conversation piece for the pizza lover on your work site! Stainless steel blade with removable housing for washing. Pizza saw is approx. 4 inches long….

Certified International Viva La Pasta 6-Piece Olive Oil Set with Metal Rack $33.75 Includes a 34oz. oil bottle, four 5.5″ plates, and a metal caddy….

Dremel SM20-02 120V Saw-Max Tool Kit $227.15 Includes Saw-Max Tool Kit – SM20-02, 3-in Multi-Purpose Carbide Wheel – SM500, 3-in Metal Cut-Off Wheel – SM510, 3-in Tile Diamond Wheel – SM540, 3-in Multi-Purpose Flush Cut Wheel – SM600, 2 x 4 Cutting Guide Attachment – SM842, Dust Port Adapter Attachment – TRSM810, Storage Case…

Makita BL1830 18-Volt LXT Lithium-Ion Battery $166.00 The Makita 18-volt LXT battery produces 280-percent more lifetime work with 2-times more cycles. Charging at any time will have no effect on the battery and a self-discharge keeps battery cells active and ready for use. It has a better fit and a longer run time (280 percent longer run times)….

DEWALT Bare-Tool DC390B 6-1/2-Inch 18-Volt Cordless Circular Saw $197.00 The DeWalt DC390 is a 18V cordless circular caw (and is the tool only). The saw uses 6-1/2 inch carbide tipped blade for 2x cutting capacity at 90 and 45 degrees. It has high strength magnesium shoe and upper guard provides increased durability. 0-50 degree bevel capacity provides additional capacity for a multitude of applications. It features fan-cooled motor with replaceable brushes for maximum…

CUT BLADE CT-02 FOR W7200 $50.00 CUTTER BLADE FOR CANON W7250 & W6200…

GREENLEE TEXTRON LCSW13A WOOD CUTTING CIRCULAR SAW BLADE $23.52 Carbide-tipped wood circular saw blade….

GREENLEE TEXTRON LCSW13B THIN WOOD CUTTING CIRCULAR SAW BLADE $38.42 Carbide-tipped wood circular saw blade….

Photo Jigsaw Puzzle of Silent Film Still from Granger Art on Demand $24.99 Photo Puzzle, SILENT FILM STILL. SILENT FILM STILL. Chosen by Granger Art on Demand. 10×14 Photo Puzzle with 252 pieces. Packed in black cardboard box of dimensions 5 5/8 x 7 5/8 x 1 1/5. Puzzle image 5×7 affixed to box top. Puzzle pieces printed on RA4 paper at 300 dpi. This item is shipped from our American lab….

Carrera Precision 15-inch 110 T Carbide Tipped Circular Saw Blade $67.99 Carrera Precision blade has heat vents and an expansion slot Cutting blade has C-6 tungsten carbide tip with titanium and tantalum Blade has high carbon steel alloy body