Flush Trim Router
Router or Trimmer and bit to Trim Laminate?
Im putting some formica on a vertical wall. I will be trimming the edge to flush to the drywall. I will then be putting some formica on a desk and will need to trim as well.
Should i use a laminate trimmer or a full size router? And what would be the best bit for somthing like that since i will be holding the trimmer horizontal?
Thank you in advance,
Ken D
Laminate trimmer is WAY easier to use on a wall than a router. Just be careful to not let the guide of the bit to dig into the drywall. Here are a couple of bits to choose from.
Flush cutting:
http://www.amazon.com/Porter-Cable-43216PC-Flush-Laminate-Trimming/dp/B00004Y78S/ref=sr_1_29?ie=UTF8&s=hi&qid=1224884527&sr=1-29
http://www.amazon.com/Porter-Cable-43286PC-Double-Laminate-Trimming/dp/B000WMWGOO/ref=sr_1_27?ie=UTF8&s=hi&qid=1224884527&sr=1-27
Bevel cutting bits:
http://www.amazon.com/85420M-8-Inch-Diameter-Laminate-Bearing/dp/B000GYBXN8/ref=sr_1_18?ie=UTF8&s=hi&qid=1224884506&sr=1-18
Hope this helps.
Flush Trim Router Bits
|
|
Porter Cable 43182PC 1/2″ Laminate Flush Trim Router Bit 1/2 Shank $8.00 |
|
|
NEW 1/2×1 Flush Trim 1/4s Rtr Bit Ea. ROUTER BITS – 1/4 IN CARBIDE 23159 $15.96 |
|
|
1 pc 1/4″ SH Top Bearing Flush Trim Pattern Router Bit $16.35 |
|
|
Amana Flush Trim Router Bit w/Ball Bearing Guide#47090 $13.65 |
|
|
Amana Flush Trim Router Bit w/Ball Bearing Guide#47092 $14.21 |
|
|
Amana Flush Trim Router Bit w/Ball Bearing Guide #47100 $9.49 |
|
|
1 pc 1/2″ SH 2-1/2″ Extra Long Flush Trim Router Bit $15.45 |
|
|
NEW Flush Trim Router Bit Ea. ROUTER BITS – 1/4 IN CARBIDE 42-102 $23.24 |
|
|
Lot of 9 Amana Tool 47104 Carbide Tipped Router Flush Trim Bits $94.95 |
|
|
2-Pack Porter Cable 43320PC USA 5/8 Laminate Flush Trim Carbide Router Bit 1/4″ $14.97 |
|
|
Whiteside Flush Trim Router Bit 1/2Dx1″CL #2405 $15.21 |
|
|
AMANA ROUTER BOTTOM BEARING FLUSH TRIM BIT 1/2″ SHAFT 3 FLUTE # 47118-2 CARBIDE $24.95 |
|
|
Lot of 4 Router Bits Laminate Carbide Flush Trimming Straight Trimmer Oldham 316 $34.99 |
|
|
Freud 1/2 x 1″ Flush Trim Router Bit (No BEARING) (Model: FRE-42104) $19.00 $19.00 |
|
|
Freud Flush Trim Router Bit, Bottom Bearing 1/2″D 2″CL 2FL 1/2″SH #44100 $20.00 $20.00 |
|
|
Whiteside RFT5125 Flush Trim Up Cut Spiral Router Bit $60.00 |
|
|
6 PC Flush Trim Top Bearing Carbide Tip Router Bit Set 1/2” W/ Wood Stand NEW $29.95 |
|
|
CARBIDE Tipped Flush Trim Router Bit USA 1″Cut 1/2″ Shank 1/2″ Bearing $9.95 |
|
|
Irwin Router Bit 1/2 x 1″ Laminate Flush Trim 1/4 Shank $9.79 |
|
|
Amana 1/2″ Flush Trim 2 Flute Carbide Tip Router Bit 1/2″Shank 2″Cut Length NEW $22.00 |
|
|
Bosch, Flush Trim Router Bit, NEW in case. 1/2″ x 1-1/2″ $7.99 |
|
|
Magna 1″ x 3/8″ 2-Flute Flush Trim Router Bit #91175 $8.00 |
|
|
Brand New in Package LOT of 5 Porter Cable Flush Trim Carbide Tipped Router Bits $50.00 |
|
|
New LOT of 5 Porter Cable Router Bits Beading Flush Trim Hinge Mortising Roundov $50.00 |
|
|
New Lot of 5 Porter Cable Router Bits Beading Flush Trim Panel Pilot Roundover + $50.00 |
|
|
VINTAGE FREUD 42-100 FLUSH TRIMMING 3/8 ROUTER BIT, EX $29.95 |
|
|
DML INDUSTRIAL ROUTER BIT 01525 1/4in. SC FLUSH TRIM CARBIDE BIT $12.99 |
|
|
(1 drill/router bit choice) vermont american/ace part FREE USA SHIPPING $8.99 |
|
|
3 pc 1/4″ SH Extra Long Blade Flush Trim Router Bit Set $31.00 |
|
|
(5) Flush Trim Router Bits 1/4″ Shank, Brand New $12.99 |
|
|
Bosch 85268M 3/8″ x 1/4″ Double Flute Laminate Flush Trim Router Bit $19.99 |
|
|
Amana 47090 Flush Trim 1/4 Diameter 1/4 Shank Router Bit $32.24 |
|
|
Amana 47114 Flush Trim 3 Flute 1/4″ Shank Router Bit $30.44 |
|
|
BOSCH 85285MC ROUTER BIT FLUSH TRIM 1/4″ SHANK $9.23 |
|
|
Freud 43-128 3/4-Inch Dia Insert Flush Trim Router Bit $54.99 |
|
|
Freud Router bit 42-102 Ball Bearing Flush Trimming 3/8 $16.00 |
|
|
Amana 47092 Flush Trim 1/4″ Diameter 1/4″ Shank Router Bit $33.18 |
|
|
NEW Flush Trim Router Bit Ea. ROUTER BITS – 1/4 IN CARBIDE 42-106 $23.95 |
|
|
Task Carbide Router Bit 1/2″ Flush Trim (T24323) $15.99 |
|
|
Freud 42-106 1/2″ 2-Flute Flush Trimming Router Bit $17.37 |
|
|
#169 VIPER FLUSH/BEVEL TRIM ASSEMBLY ROUTER BIT 3/8″DEP $14.99 |
|
|
NEW PORTER CABLE CARBIDE Tipped 1/2″ Flush Trim Router Bit 1/4″ Shank $14.99 |
|
|
Task Carbide Router Bit 3/8″ Flush Trim (T24322) $15.99 |
|
|
Task Carbide Router Bit 3/8″ Flush Trim (T24321) $15.99 |
|
|
Task Carbide Router Bit 1/2″ Flush Trim (T24332) $19.99 |
|
|
Task Carbide Router Bit 1/2″ Flush Trim (T24329) $19.99 |
|
|
Timberline 195-14 Flush & Bevel Trim with Pilot Router $6.25 |
|
|
Whiteside Spiral Flush Trim Carbide Router Bit 1/4Dx1″ CL RFT2100 Up Cut $34.56 |
|
|
AMANA ROUTER BIT#45466-FLUSH TRIM PATTERN-1″ DIA-3/8″ SHANK-TOP BEARING-2/FLUTE $23.59 |
|
|
AMANA ROUTER BIT#47160—FLUSH TRIM “V” GROOVE BIT-1/2″ DIA-1/4″ SHANK-2/FLUTE $21.00 |
|
|
AMANA ROUTER BIT#45464 FLUSH TRIM PATTERN BIT-3/4″ DIA.-1/4″ SHANK- TOP BEARING $19.99 |
|
|
BOSCH ROUTER BIT #85216M-1/2″ FLUSH TRIM LAMINATE BIT–3/FLUTE–1/4″ SHANK $19.99 |
|
|
BOSCH ROUTER BIT #85287-1/4″ FLUSH TRIM BIT-DRII THRU POINT $14.99 |
|
|
BOSCH ROUTER BIT # 85417 FLUSH TRIM CUTTER HEAD-4/FLUTE-CARBIDE TIP $7.99 |
|
|
Freud 64-100 1/4″D Solid Carbide Flush Trim Router Bit $12.16 |
|
|
Porter Cable 43320PC Laminate Flush Trim Router Bit 3 Flute $7.50 |
|
|
CMT 806.128.11 Flush Trim Router Bit $25.99 |
|
|
New Porter-Cable 44858PC Combination Flush & Bevel Trim Router Bit $19.99 |
|
|
Bosch Power Tools 3/8″ Laminate Flush Trim Router Bit Double Flute 85268M $14.99 |
|
|
Bosch Power Tools 3/8″ Laminate Flush Trim Router Bit Double Flute 85269M $14.99 |
|
|
Freud 42-100 3/8″ Diameter Flush Trim Router Bit $14.85 |
|
|
Milwaukee 48-23-7245 1/4-Inch x 1-1/2-Inch Shank Flush and Bevel Trim Router Bit $4.99 |
|
|
Freud 42-110 1/2″ Diameter x 3-1/4″ Double Flute Flush Trimming Router Bit NEW $18.49 |
|
|
Amana 51200 Panel Pilot Flush Trim Solid Router Bit $19.79 |
|
|
OLDHAM VIPER #167 ROUTER BIT FLUSH/BEVEL TRIM ASSEMBLY $13.59 |
|
|
OLDHAM VIPER #168 ROUTER BIT FLUSH/BEVEL TRIM ASSEMBLY $13.59 |
|
|
Router Bits ~ Your choice of 1/2″ shank bits ~ NEW in box Wood Craft Bits $12.95 |
|
|
Viper Router Bit Flush/Bevel Trim Assembly #169 $13.99 |
|
|
Master Mechanic421594 Carbide Tipped 1/2″ Flush Trimming Router Bit 1/4″ shank $11.99 |
|
|
NEW Freud 42-109 1/2″ FLUSH TRIM Router Bit 1/2″ Shank $14.95 |
|
|
Freud 50-126 1-1/4″ TOP BEARING FLUSH TRIM Router Bit $49.95 |
|
|
Amana 47100 Flush Trim 3/8″ Diameter 1/4″ Shank Router Bit $25.15 |
|
|
Amana 47104 Flush Trim 1/2″ Diameter 1/4″ Shank Router Bit $25.77 |
|
|
NEW Ct 3/8 Flush Trim 1/4s Ea. ROUTER BITS – 1/4 IN CARBIDE 85268MC $21.92 |
|
|
CRAFTSMAN PRO 1/2″ DIAMETER x 1/2″ HIGH FLUSH TRIMMING ROUTER BIT~MADE IN ITALY $14.98 |
|
|
1 pc 1/2″SH 2″ Blade Top Bearing Flush Trim Router Bit $14.75 |
|
|
1 pc 1/2″ SH 3″ Extra Long Flush Trim Router Bit $12.50 |
|
|
#167 VIPER OLDHAM 5/8″ Diam ROUTER BIT FLUSH-BEVEL TRIM $12.99 |
|
|
Bosch Power Tools Laminate Flush Trim Router Bit 85285 $9.99 |
|
|
NEW Sc 1/4 Flush Trim 1/4s Ea. ROUTER BITS – 1/4 IN CARBIDE 85285MC $16.54 |
|
|
Porter Cable 43182PC 1/2″ Laminate Flush Trim Carbide Tipped Router Bit NEW $10.73 |
|
|
CMT ORANGE 1/2″ FLUSH TRIM Router Bit 806.627.11 1/2″Shank FREE SHIPPING! $19.95 |
|
|
1 pc 1/2″ SH 2-1/2″ Extra Long Flush Trim Router Bit $11.75 |
|
|
1 pc 1/4″ SH 2-1/2″ Extra Long Flush Trim Router Bit $11.50 |
|
|
1 pc 1/4″ SH 2″ Blade Extra Long Flush Trim Router Bit $11.25 |
|
|
1 pc 1/4″ SH 1-1/2″ Extra Long Flush Trim Router Bit $8.50 |
|
|
1 pc 1/2″ SH 2″ Blade Extra Long Flush Trim Router Bit $8.25 |
|
|
Bosch Power Tools Laminate Flush Trim Router Bit Triple Flute 85216M $18.37 |
|
|
1 pc 1/4″ SH 3″ Blade Extra Long Flush Trim Router Bit $11.50 |
|
|
FREUD 42-106 CARBIDE TIP BEARING FLUSH TRIM ROUTER BIT NIB 1/4 SHANK $16.77 |
|
|
FREUD 64-100 CARBIDE TIP SOLID CARBIDE FLUSH TRIM ROUTER BIT NIB 1/4 SHANK $9.27 |
|
|
Milwaukee 48-23-6541 1/2-Inch x 3-1/4-Inch CBD Flush Trim Router Bit $24.95 |
|
|
CMT 806.095.11 Flush Trim Router Bit $20.91 |
|
|
Freud 42-100 Flush Trimming Bit Router Bit $14.99 |
|
|
Magna 1″ x 1/2″ Laminate Flush Trim Router Bit #91177 $9.00 |
|
|
Milwaukee 48-23-6515 3/8-Inch x 2-5/16-Inch CBD Flush Trim Router Bit $19.95 |
|
|
BOSCH 85269MC ROUTER BIT FLUSH TRIM 1/4-IN SHANK $11.78 |
|
|
Whiteside Spiral Flush Trim Carbide Router Bit 142Dx1″CL RFTD2100 Down Cut $34.66 |
|
|
Whiteside Flush Trim Router Bit 1/2Dx2″CL #2408 $23.16 |
|
|
Whiteside Flush Trim Router Bit 1/4Dx1/4″CL SC28C $8.21 |
|
|
Porter-Cable 7310 5.6 Amp 3/4-Horsepower Laminate Trim Router $164.00 The perfect tool for most trimming, edge-forming, and hinge-routing jobs, the Porter-Cable Trim Router is ideal for professionals. Comfortable to handle and easy to hold with just one hand, this router gives you the control and precision you need to make quick, accurate cuts.7310 Trim RouterAt a Glance:Durable trim router with heavy-duty 5.6 amp motorMicro-set adjustment knob for quick and easy de… |
|
|
Freud 50-102 1/2-Inch Top Bearing Flush Trim Bit $14.00 An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. The top mounted bearings on these bits make them ideal for lettering and other template work where the work piece is being grooved or routed out. Th… |
|
|
Freud 42-114 Bearing Flush Trim Router Bit 1/2 Diameter, 1/2 shank with TiCo Hi-Density Carbide $14.10 An industry leader for over 50 years, the Freud name equals quality, precision and craftsmanship. Freud router bits feature Freud made TiCo Hi-Density Carbide for maximum cutting life. Each bit is individually balanced, giving a cut above the rest. Rely on this router bit for a smooth, burn-free cut. Bottom mounted bearings for trimming laminate counter tops and doing pattern work. Two flutes pro… |
June 5th, 2010 in
Tools | tags: bit, carpentry, flush trim router, flush trim router bit, flush trim router jig, router, spiral flush trim router bit, Tools, using flush trim router bit, woodworking
