Metric Flare Nut
Flare Nut Wrench – What It Is and How to Use It
Flare Nut Wrench – What It Is and How to Use It
By Olivia Stanford
My husband loves tools but when he said that he needed a good flare nut wrench set, I had no idea what he was talking about!
Being the good wife I am, though, I decided to do some research. After all, a flare nut wrench set might be a good gift idea, right?
Flare Nut Wrenches are Designed for Soft Metals
This type of wrench is designed for soft metals like aluminum and brass that can crush or strip easily.
The flare nut wrench is similar to a box-end wrench, but with a small opening on one side.
A box-end wrench looks like a short bar with a completely enclosed circle on one or both ends, with the circle(s) available in several different sizes. The box-end wrench slips on one end of your fitting. It is designed to allow maximum contact with the pipe, nut or fitting that needs tightening or loosening.
This prevents damage to the fitting so that it does not get stripped or otherwise damaged.
Flare nut wrenches are similar to a box-end wrench, only with a small opening to allow the wrench to slide perpendicularly over the fitting or pipe. The “jaws” of the wrench are larger and thicker, allowing better contact with your fitting.
Picture working on a pipe. You can’t get a wrench over one end of the pipe because it is a continuous piece, so the flare nut wrench allows a small opening on one side of the wrench to slip it over the pipe.
Because pipes are typically made of copper, brass or aluminum, this type of tool is designed to tighten or loosen fittings on pipes with maximum contact.
You might think of a pipe fitting. If you use an open-end wrench to tighten it, the wrench may only make contact with 2, or at most, 3 spots on the fitting. This means that your pipe fitting could be crushed or dented when tightening or loosening, causing a loss of integrity for your application.
What Do You Use a Flare Nut Wrench for?
The most common uses for flare nut wrenches are plumbing applications (like copper pipe), automotive (since a lot of car parts and fittings are made of aluminum) applications, and hvac or heating and air conditioning applications.
For example, most automotive fuel and brake lines are made of soft metal and it can be quite easy to strip out a fitting or line, leaving you covered in brake fluid or gas!
Flare nut wrenches are also known by other names including “tube wrench” and “line wrench.” The British equivalent is “crow’s foot spanner.”
What Does “6 Point” and “12 Point Fractional” Mean?
Flare nut wrenches come in 6 point and 12 point “fractional”.
6 point means that there are 6 points of contact inside the wrench (picture your tool touching the pipe or fitting in 6 separate places), and 12 point means that there are 12 points of contact with your fitting or pipe application. Of course, 12 points means better contact and possibly less potential for damage to your fitting.
12 point fractional tools, though, are less common than their 6 point counterparts.
Common sizes for flare nut wrenches include metric and SAE (measurements in inches).
You can find flare nut wrench sets in multiples of ? to 11/16 inches, and 9 to 21 millimeter sizes.
Buy a Good Quality Flare Nut Wrench Set
Reviewers all agree unanimously – buy good quality flare nut wrenches!
Kobalt, Craftsman, Snap-On and Husky have all received good reviews.
People who have bought flare nut wrench sets from Harbor Freight and other bargain retailers have all recounted that their tools stripped out or damaged fittings, causing them to have to spend more money to buy the better quality tools to finish their application.
The good news is that once you’ve bought your quality wrench set, it will be in your tool box for years to come and ready to perform as needed.
It’s a good idea to buy a good quality flare nut wrench set that will last a lifetime!
About the Author
This author really enjoys his home and family and lives life to the full. He also loves to learn about everything. Feel free to see some of his interests at
and
Sockets & Socket Wrenches
|
|
Snap On 6 pc. Flare Nut Wrench set Metric EXCELLENT used RXFMS1921B $119.00 |
|
|
Craftsman 4pc Metric Flare Nut Wrenches Tools 10-18mm $18.99 |
|
|
15 Pcs Metric Crowfoot Flare Nut Wrench Tool New HD Automotive Hand Tools Case $49.49 |
|
|
6 pc Piece Flare Nut WRENCH SET Metric MM Brake LIne $21.74 |
|
|
6pc METRIC Offset FLARE NUT LINE WRENCH SET w/ Case New $24.99 |
|
|
FLARE NUT LINE WRENCH SET METRIC MICHIGAN INDUSTRIAL TOOL – LIFETIME WARRANTY $13.99 |
|
|
VHT-8811 V8 Hand Tools 11 pc. Flare Nut/Open End Wrench Set – Metric $56.74 |
|
|
Snap-on Industrial Brand 5-Piece Metric Double Head Flare Nut NEW $89.99 |
|
|
Craftsman Metric Flare Nut Combination Wrench – Any Size – USA Wrenches Tools $7.95 |
|
|
Craftsman Metric Flare Nut Combination Wrench – Any Size – USA Wrenches Tools $7.95 |
|
|
12 pc Piece Flare Nut WRENCH SET Metric MM & SAE 12pc Piece 6+6 Hydraulic Brake $34.48 |
|
|
SK Hand Tool SKT-4511 11 pc. Metric Flare Nut Crowfoot Wrench Set $145.30 |
|
|
SK Hand Tool SKT-8809 9 x 11 SuperKrome Metric Flare Nut Wrench $23.09 |
|
|
SK Hand Tool SKT-8810 10 x 12 SuperKrome Metric Flare Nut Wrench $24.51 |
|
|
SK Hand Tool SKT-8813 13 x 14 SuperKrome Metric Flare Nut Wrench $25.88 |
|
|
SK Hand Tool SKT-8815 15 x 17 SuperKrome Metric Flare Nut Wrench $27.71 |
|
|
SK Hand Tool SKT-8818 16 x 18 SuperKrome Metric Flare Nut Wrench $28.96 |
|
|
SK Hand Tool SKT-8829 6-Point SuperKrome® Metric Flare Nut Wrench – 19mm x 21mm $30.42 |
|
|
KD Tools 3 Pc Flex Flare Nut Wrench Set-Metric 81915 $36.25 |
|
|
Snap On Flare Nut Double End Metric & S.A.E. Wrench Set $30.00 |
|
|
Pro Value/ Car Quest METRIC & SAE Flare Nut Wrenches $7.25 |
|
|
Pro Value/ Car Quest METRIC & SAE Flare Nut Wrenches $7.75 |
|
|
NEW CRAFTSMAN PROFESSiONAL FULL POLiSH FLARE NUT WRENCH METRiC MM SET USA 42013 $49.99 |
|
|
Snap-On Metric Flare Nut Double-Ended Wrench $14.99 |
|
|
12 PC. FLARE NUT LINE WRENCH SET- SAE AND METRIC – 6 POINT PRO GRADE $37.95 |
|
|
Michigan Industrial 3 pc Flare Nut Wrench Set Metric $19.99 |
|
|
Wright Tools 4pc Metric Flare Nut Wrenches 9mm-11mm 10mm-12mm 13mm-14mm 15mm-17m $19.00 |
|
|
14 Pc 1/2″ DR. Jumbo Crowfoot Flare Nut Wrench Metric Sizes Chrome Molly Large $134.49 |
|
|
Michigan Industrial 6 pc Flare Nut Wrench Set Metric $30.99 |
|
|
Craftsman New 5 pc. Metric Flare Nut Wrench Set $27.99 |
|
|
Craftsman Metric Flare Nut Wrench 4 Piece Set New $9.00 |
|
|
SK Hand Tool SKT-87266 Metric 15° Offset Flare Nut Wrench $28.58 |
|
|
SK Hand Tool SKT-87260 Metric 15° Offset Flare Nut Wrench $24.91 |
|
|
9 Pc Metric Flare Nut Crowfoot Wrench Set $24.99 |
|
|
Michigan Industrial Tools 3Pc Fuel Brake AC Line Flare Nut Wrench Set Metric $17.99 |
|
|
Powerbuilt 640186 Metric Flare Nut Wrench Set, 4-Piece $16.05 |
|
|
LINE WRENCH 5PC SET FLARE NUT FLANK DRIVE CHROME METRIC MAKES A GREAT GIFT! $29.99 |
|
|
TEKTON 2655 Flare Nut Wrench Set, Metric, 6-Piece – 6mm – 24mm $19.99 |
|
|
Flare Nut Spanner Set – Metric – 3 Piece $24.30 |
|
|
Signet Metric Flare Nut Wrench 9mm x 11mm $11.32 |
|
|
Snap-on Metric Combination & Flare Nut 6-Point Wrench Set – 10mm to 18mm $0.99 |
|
|
EZ Red EZFN775M 75° Offset Flare Nut Metric Wrench Set $69.99 |
|
|
Metric Flare Nut Wrenches – Performance Tool $5.50 |
|
|
GEARWRENCH 3 PIECE METRIC FLEX FLARE NUT LINE WRENCH SET 81915 FLEXIBLE HEAD $29.99 |
|
|
KD Tools 6 Piece Metric Flare Nut Wrench Set $65.86 |
|
|
TEKTON 2655 Flare Nut Wrench Set, Metric, 6-Piece $21.97 |
|
|
Sunex 9710M 10 Piece 3/8-Inch Drive Metric Crowfoot Flare Nut Wrench Set $36.50 |
|
|
Wright Tool 744 5 Pc. Metric Flare Nut Wrench Set, in a Roll $89.99 |
|
|
SK Hand Tool SKT-87259 Metric 15° Offset Flare Nut Wrench 9mm X 11mm $23.09 |
|
|
TEKTON 2655 Flare Nut Wrench Set, Metric, 6-Piece $20.45 |
|
|
CROWFOOT FLARE NUT SET METRIC 10 PC 3/8IN. DRIVE $32.99 |
|
|
Matco 6pc Metric Flare Nut Line Wrench Set 9mm – 21mm w/ Snap On Needle Nose $0.99 |
|
|
Grip 91080 6-Piece Flare Nut Wrench Set (Metric) $26.99 |
|
|
KD Tools Flex Head Metric Flare Nut Wrench 10mm x 12mm $32.93 |
|
|
KD Tools 81915 3 Piece Metric Flex Flare Nut Wrench Set $51.96 |
|
|
Sunex 9809 SAE and Metric Flare Nut Wrench Set – 9pc $42.99 |
|
|
NEW ASTRO PNEUMATIC TOOL CO. DOUBLE OFFSET FLEXIBLE FLARE NUT WRENCH SET METRIC $34.95 |
|
|
6pc METRIC Offset FLARE NUT LINE WRENCH SET w/ Case New $24.99 |
|
|
DRAPER 04486 – 8MM X 10MM ELORA METRIC FLARE NUT SPANNER $21.34 |
|
|
DRAPER 04494 – 9MM X 11MM ELORA METRIC FLARE NUT SPANNER $21.34 |
|
|
DRAPER 04501 – 10MM X 12MM ELORA METRIC FLARE NUT SPANNER $22.11 |
|
|
Wright 16-11mm Metric 6 Pt Double Head Flare Nut Wrench 9mm / 11mm New $15.00 |
|
|
DRAPER 14570 – 22MM X 24MM ELORA METRIC FLARE NUT SPANNER $44.43 |
|
|
DRAPER 14571 – 24MM X 27MM ELORA METRIC FLARE NUT SPANNER $54.88 |
|
|
DRAPER 14572 – 30MM X 32MM ELORA METRIC FLARE NUT SPANNER $70.93 |
|
|
6 pc Piece Flare Nut WRENCH SET Metric MM Brake LIne $22.88 |
|
|
Performance Tool 10mm x 12mm Flare Nut Wrench W30410 New Metric Line Tube Wrench $6.50 |
|
|
Performance Tool 15mm x 17mm Flare Nut Wrench W30415 New Metric Line Tube Wrench $7.65 |
|
|
Performance Tool 16mm x 18mm Flare Nut Wrench W30416 New Metric Line Tube Wrench $7.65 |
|
|
CRAFTSMAN 9-42013 5 PIECE POLISHED METRIC FLARE NUT WRENCH SET $43.99 |
|
|
CRAFTSMAN 10 PC 3/8″ FLARE NUT CROWFOOT WRENCH SET $52.00 |
|
|
Sunex SAE And Metric Flare Nut Wrench Set 9 Piece Tools & Home Improvement New $41.37 |
|
|
S-K Hand Tool Crowfoot Flare Nut Set 3/8In. Drive Metric 11Pc 4511 $132.08 |
|
|
Craftsman 4pc Metric Flare Nut Wrenches Tools 10-18mm Lot NEW $21.95 |
|
|
ASTRO 6 PC METRIC DOUBLE OFFSET FLEXIBLE HEAD FLARE NUT WRENCH SET NO.7118 $44.59 |
|
|
SK Hand Tools Metric Flare Nut Wrench 13mm x 14mm (8813) New Make in USA $14.85 |
|
|
SK Hand Tools Metric Flare Nut Wrench 15mm x 17mm (8815) New Make in USA $15.80 |
|
|
SK Hand Tools Metric Flare Nut Wrench 19mm x 21mm (8829) New Make in USA $18.10 |
|
|
GearWrench 81906 6-Piece Flare Nut Metric Wrench Set $69.52 |
|
|
KD Tools 3 Piece Metric Flex Flare Nut Wrench Set $45.44 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $7.00 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $7.25 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $8.50 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $7.25 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $7.50 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $8.50 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $7.25 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $7.25 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $8.50 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $7.50 |
|
|
Flare Nut Wrenches ( Metric & SAE ) $7.00 |
|
|
GearWrench 81906 6-Piece Flare Nut Metric Wrench Set $72.87 |
|
|
Sunex 9710M 10 Piece 3/8-Inch Drive Metric Crowfoot Flare Nut Wrench Set $31.23 |
|
|
SNAP-ON TOOLS 6 PCS 9-21 MM METRIC FLARE NUT DOUBLE END USA WRENCH SET RXFMS606B $179.99 |
|
|
12pc MIT FLARE NUT LINE WRENCH SET SAE & METRIC $47.99 |
|
|
12 PC. FLARE NUT WRENCH SET- SAE AND METRIC – WARRANTY $37.99 |
|
|
V8 Tools 11 Piece Metric Flare Nut/Open End Wrench Set $49.99 |
|
|
12pc CALHAWK PRO FLARE NUT LINE WRENCH SET SAE & METRIC $41.99 |
|
|
6pc CALHAWK PRO FLARE NUT LINE WRENCH SET METRIC $24.99 |
|
|
8pc CALHAWK FLARE NUT CROWFOOT WRENCH SET METRIC $21.99 |
|
|
TEKTON 2655 Flare Nut Wrench Set, Metric, 6-Piece $13.15 MIT 6-PC. FLARE NUT WRENCH SET features: Drop Forged Carbon Steel Construction, Heat Treated and Chrome Plated, 15-Degree Offset for Easy Access, Ideal For Fuel, Brake, and Air Conditioning Lines, 6-pc. Wrenches (Metric): 6 x 8, 10 x 12, 13 x 14, 15 x 17, 19 x 21, 22 x 24mm… |
|
|
TEKTON 2580 3/8-Inch Drive Crowfoot Wrench Set, Metric, 10-Piece $11.50 MIT 10-PC. 3/8″-DRIVE CROWFOOT WRENCH SET features: Drop Forged Alloy Steel Construction, Heat Treated and Chrome Plated, Speeds Up Removal or Installation of Hard-to-Reach Fasteners, Works Where a Conventional Socket Can’t, 10-pc. 3/8″-Dr. Crowfoot Wrenches (Metric): 10, 11, 13, 14, 15, 17, 19, 21, 22, 24mm… |
|
|
Sunex 9710M 10 Piece 3/8-Inch Drive Metric Crowfoot Flare Nut Wrench Set $21.25 Fully polished drop forged alloy steel Mounted on a convenient storage railBasic doesn’t have to be ordinary. Bringing you an exciting range of resources, Sunex hand tools put a new spin on handling fasteners. With the design and strength to work in most any situation, these tools will be right with you all of the way. There’s no sacrifice, you have strength and comfort! Set includes… |
