Rubber Mallet

How To Install Laminate Flooring – Top 5 Tips

If you have purchased laminate flooring, or are thinking about it, would it not be a good idea to learn how to install laminate flooring? By doing so you could potentially save yourself hundreds of dollars that could be put towards a better quality laminate.

Time and time again I see people pay $2 per square foot and then some to have a “pro” come to their home for the install. Then after a couple of hours they are done with you thinking how quick it was!

Obviously you are please to have your new laminate flooring down, but in the back of your mind, or after handing over the check to your installer you may be wishing you knew how to install laminate flooring.

I hope to give you some tips that you can use to install your own laminate flooring, and in turn save you a bunch of money at the same time. Also the pride factor of telling your friends that you did it yourself is worth so much more!

How To Install Laminate Flooring TIP #1: Measure Your Floor

The most important part of this project is to make sure you get enough material for your job, in order to do this you need to know just how many square feet you need to cover with your laminate flooring.

This can be confusing for some, but I’ll try my best to make it as easy as possible.

Take a tape measure and measure both the width and the length of your room.

Example: 10′ wide by 20′ long (10×20)

Now multiply the two measurements together.

Example: 10′x20′= 200 square feet (200sf)

So now you know you are dealing with approximately 200sf of area, now all we need to do is add an extra 10% for cuts and waste.

Example: 200sf + 10% = 220sf (220sf)

This method is based on the fact you have a square room. However many rooms are odd shaped and can confuse people when trying to measure them the right way.

You can do two things here, you can either still measure the longest wall as well as the longest width of your room, and then multiply them together to get your square feet.

When using this method you know you have plenty of flooring for your room, and in some cases can avoid adding the 10% extra because you are already covered by over measuring in the first place.

The second option is to divide your odd shaped rooms into smaller box shaped sections, this enables you to find out the square foot of each section, then add the total square foot together from each one of your sections. Remember the 10% applies for this option too.

How To Install Laminate Wood Flooring TIP #2: Start At The Longest Wall

The first thing to do is lay the underlayment(padding) down first, just one row against the longest wall is fine. Now you can begin with your first plank, make sure you start with a full plank first, the cuts will be made at the other end.

Place the first plank down a couple of feet away from the longest wall, then lock in the remainder of that rows planks one by one all across the floor until you get to the other end.

Upon approaching the other end of the wall you will notice you may have to cut a plank shorter in order for that last plank to fit. So now we are going to make our first cut.

Measure how much you need to cut off the last plank from that row allowing for a 1/4″ expansion gap(step #4). Once this is cut lock it into place to complete this first row.

Now you have your very first row completed all you need to do is follow the same method for the next row, but this time starting with the 2/3 plank(tip #3).

When you have completed the second row its now time to slide both rows back against the wall, again allow for that 1/4″ expansion gap(tip#4), use spacers if needed or even waste cuts from your floor standing up.

The reason we started away from the wall was to give you enough space to work on the rows closest to the wall, without actually having to be right up against that wall with no space to move in.

Once you have the two rows against the wall the rest is easy! Keep going all the way across the floor adding the underlayment and the planking until the job is completed.

Oh – Tape the seams of your laminate flooring underlayment with either regular packaging tape, or duck tape.

How To Install Laminate Flooring TIP #3: Cut Planks Into Thirds

Before making your first cut on your laminate flooring, I’m going to share with you a neat cutting rule that saves on waste, and will stagger the pattern of your floor to make it look like a real wood installation.

Cut planks into thirds – So the very first plank you use will be a full one, when you start the next row, you should start with 2/3 of a plank, and the row after that will be 1/3.

When you cut the laminate flooring like this it will not only stagger your laminate pattern to make it resemble a more natural wood floor, but it also means you can use the waste you cut off your 2/3 plank(1/3) at the start of your very next row and so on.

This method limits your waste a great deal, and gives you a cool pattern at the same time.

Hint: Some laminate flooring designs look like tile, and some wooden designs require you to cut the laminate planking in half for each row. But just check that floors instructions and if it does not require this, then use the rule of 3rds.

How To Install Laminate Flooring TIP #4: Use An Expansion Gap

Regardless of what laminate wood flooring you install, most, if not all products require you to leave a 1/4″ expansion gap around the entire perimeter of your room.

This 1/4 inch gap allows the floor to expand and contract in different temperature changes throughout the seasons. If this is not taken into account when installing your floors and making cuts, the laminate floor could bow and split if that 1/4″ gap is not applied around the entire area.

How To Install Laminate Flooring TIP #5: Tools Of The Trade

The right tools can save you a ton of time, and a huge amount of aggravation at the same time.

From your local hardware store grab hold of a pull bar, a tapping block, and a rubber mallet. The pull bar will assist you in pulling together lose seams at  the shorter ends of your laminate flooring. And the tapping block will help you tap together gaps between planks on the longest sides.

Use the rubber mallet to gently tap either the pull bar or the tapping block in order to close any laminate flooring seams together that you could not join by hand.

If you do not have a rubber mallet, wrap a regular hammer in either duck tape or painters tape, this will act as a buffer and take most of the impact away from the laminate seams keeping them intact.

Hardware stores stock laminate table saw blades to cut the flooring, but if you cant get a laminate blade find a blade with fine teeth, or a good finishing blade to get a nice fine cut.

How To Install Laminate Flooring Conclusion

I hope this information helped give you an idea how to install laminate flooring, it really is not that hard to do with the know-how and desire to complete your project. And just think of the money you will save too!

Have fun with it, and again take pride in telling others that you did it yourself.

About the Author

To find out more information on how to install laminate flooring, and take a look at some of teh best laminate deals online visit the Laminate Wood Flooring Store today. It could save you thousands!

Alien Ant Farm – Rubber Mallet

36 Units of Rubber Mallet New Bulk Wholesale Lots $71.64

VAUGHAN / 20 OZ. BLACK SOLID RUBBER MALLET WITH FINE HARDWOOD HANDLE / NEW $13.99

1.2″ Dia Head 2-Way Plastic Rubber Hammer Wire Jewelry Mallet $15.77

NEW 18oz Rubber Mallet Each Mallets 57-522 076174575224 $22.99

NEW Magnum Tool MAR16 Rubber Mallet – 1 Pound $4.99

Rubber Headed Mallet $14.99

11.8″ Long Antiskid Handle Black Hard Rubber Mallet Hammer $21.14

935RM16 1-Pound Rubber Mallet $4.00

Large 2 lb. Wood Handle Rubber Mallet $9.99

1.2″ Dia Head 2-Way Plastic Rubber Hammer Wire Jewelry Mallet $15.09

Bostitch 18 oz Non-Marring Rubber Mallet $26.00

TOOL-RUBBER MALLET-1 LB.-WOOD HANDLE-GOOD QUALITY-NEW $4.24

Home Hand Tool 0.31m Long Rubber Mallet Hammer Black $26.49

JobSmart 3-Piece Rubber Mallet Set,,,New in Box,,,L@@K!!!,,, $10.00

SK Hand Tool SKT-8723 Rubber Mallet with Hickory Handle – 23oz. $34.87

Forming Striking Black Handle Rubber Mallet Hammer Tool 10″ $8.60

4 Pc Rubber Mallet w/ Fiberglass Handle 8, 16, 24, 32oz $22.67

8 oz. 2 Headed Mallets with Rubber Handles Set of 4 $20.00

Nonslip Handle Soft Tap 10.2″ Long Double Head Rubber Mallet Hammer $11.38

Master Mechanic 32 OZ, Black Rubber Mallet $8.68

Master Mechanic 12 OZ, White Rubber Mallet $7.10

Master Mechanic 16 OZ, Black Rubber Mallet $7.81

Home Work Black Rubber Mallet Hammer w Nonslip Handle $17.28

Forming Striking Black Handle Rubber Mallet Hammer Tool $11.87

Soft Tap 10″ Long Antiskid Double Head Rubber Mallet Hammer $8.73

Home Hand Tool 11.8″ Long Rubber Mallet Hammer Black Clear Yellow $20.93

1.1″ Dia Head 2-Way Plastic Rubber Mallet Hammer Wire Jewelry $12.58

Soft Clear Yellow Rubber Head Damage Metal Mallet Hammer $21.13

9.5″ Moonshine Rubber Mallet New $0.99

Nonslip Handle Soft Tap 10.2″ Long Double Head Rubber Mallet Hammer $11.38

Home Hand Tool 11.8″ Long Rubber Mallet Hammer Black Clear Yellow $19.72

Soft Clear Yellow Rubber Head Damage Metal Mallet Hammer 11″ $14.20

0.31M Long Antiskid Handle Black Rubber Mallet Hammer $24.12

28oz Rubber Mallet Striking Hammer Estwing Dead Blow $39.99

3pc RUBBER MALLET SET 32oz. tool new hammer no reserve $14.99

Nonslip Handle Soft Tap 10.2″ Long Double Head Rubber Mallet Hammer $10.84

Home Hand Tool 0.31m Long Rubber Mallet Hammer Black $26.49

Home Work Black Rubber Mallet Hammer w Nonslip Handle $17.30

3pc RUBBER MALLET SET 32oz. tool new hammer no reserve $14.99

Forming Striking Black Handle Rubber Mallet Hammer Tool $12.57

Forming Striking Black Handle Rubber Mallet Hammer Tool 10″ $8.59

Soft Clear Yellow Rubber Head Damage Metal Mallet Hammer 11″ $15.15

3 PC RUBBER MALLET Fiber GLASS HANDLE 8, 16, 32 OZ TOOL $12.99

9.5″ Moonshine Rubber Mallet New $0.99

8OZ/250G RUBBER MALLET STEEL SHAFT CONTOURED GRIP CAMPING HAMMER DIY NEW $4.53

ATD-4043 32 oz. Rubber Mallet with Fiberglass Handle $20.26

Silverline 16Oz Black Solid Rubber Mallet Hammer Heavy Duty Diy Tool $7.51

Proto Hammer Rubber Mallet $30.53

Home Work Black Rubber Mallet Hammer w Nonslip Handle $17.32

0.27M Long Blk Nonslip Handle Rubber Mallet Hammer Tool $12.54

NEW Non-Marking Rubber Hand Mallet Hammer for Metal Body Casting Molds Jewelry $4.95

DIY TOOL Rubber Mallet Hammer Nonslip Handle Non-Marking 500g/17.64oz $10.50

Soft Clear Yellow Rubber Head Damage Metal Mallet Hammer 11″ $15.15

Nonslip Handle Double Head Rubber Mallet Hammer Hand Tool 11″ Long $15.01

Soft Black Rubber Head Damage Metal Mallet Hammer Tool $25.55

8 oz White Rubber Mallet Hardwood Handle Non-Marking $4.99

Armstrong Tools Rubber Mallet 2 Lb $33.08

Soft Tap 0.27M Long Antiskid Rubber Mallet Hammer Black $12.55

0.31M Long Antiskid Handle Black Rubber Mallet Hammer $19.65

Home Hand Tool 11.8″ Long Rubber Mallet Hammer Black Clear Yellow $20.90

0.25M Nonslip Handle Rubber Head Mallet Hammer Tool Blk $16.77

Master Mechanic 12oz White Rubber Mallet 704443 $8.49

0.25M Nonslip Handle Rubber Head Mallet Hammer Tool Blk $17.33

Master Mechanic 16oz Black Rubber Mallet 704435 $9.49

Master Mechanic 32oz Black Rubber Mallet 052088036372 $10.99

0.31M Long Antiskid Handle Black Rubber Mallet Hammer $26.51

Home Garden Black 0.25M Long Rubber Mallet Hammer Tool $17.29

0.25M Nonslip Handle Rubber Head Mallet Hammer Tool Blk $17.27

0.25M Nonslip Handle Rubber Head Mallet Hammer Tool Blk $20.57

Soft Clear Yellow Rubber Head Damage Metal Mallet Hammer 10.2″ $11.33

Soft Clear Yellow Rubber Head Damage Metal Mallet Hammer 11″ $15.14

16 oz. Rubber Mallet New Free Shipping $11.00

Forming Striking Black Handle Rubber Mallet Hammer Tool $12.47

Rubber Mallet 2oz $11.50

0.27M Long Blk Nonslip Handle Rubber Mallet Hammer Tool $12.51

2 Lb. Rubber Mallet $24.19

TOOLS RUBBER MALLET WOODEN HANDLE $7.99

32oz. Rubber Mallet With A Hardwood Handle $6.99

4pc Rubber Mallet w/ F/G HDL, 8, 16, 24, 32oz FREE SHIP $21.95

Genuine Sorbothane® Soft-blow Rubber Mallet Hammer NEW $39.99

0.31M Long Antiskid Handle Black Rubber Mallet Hammer $25.31

Stanley Bostitch 22 Oz. Rubber Mallet $19.23

16oz Rubber Mallet by Tool Mart $3.00

Home Hand Tool 11.8″ Long Rubber Mallet Hammer Black Clear Yellow $20.94

0.27M Long Blk Nonslip Handle Rubber Mallet Hammer Tool $12.48

Soft Tap 0.27M Long Antiskid Rubber Mallet Hammer Black $11.85

Craftsman 12-oz Plastic Tip Rubber Mallet 38292 $10.00

Soft Clear Yellow Rubber Head Damage Metal Mallet Hammer 11″ $15.16

Forming Striking Black Handle 10.2″ Rubber Mallet Hammer Tool $11.84

Hand Tool 11″ Long Rubber Mallet Hammer Black Clear Yellow $15.32

Nonslip Handle Soft Tap 10.2″ Long Double Head Rubber Mallet Hammer $11.36

0.31M Long Antiskid Handle Black Rubber Mallet Hammer $26.18

0.31M Long Antiskid Handle Black Rubber Mallet Hammer $25.29

Forming Striking Black Handle Rubber Mallet Hammer Tool 10″ $8.60

0.27M Long Blk Nonslip Handle Rubber Mallet Hammer Tool $9.85

Nonslip Handle Soft Tap 10.2″ Long Double Head Rubber Mallet Hammer $13.59

Home Hand Tool 11.8″ Long Rubber Mallet Hammer Black Clear Yellow $23.19

4 RUBBER MALLETS DELUXE 2-24oz 2 -2 POUND MALLET HAMMER FREE SHIPPING $20.99

SST-50102 Mallet Rubber 16oz Wood Handle $18.35

Home Hand Tool 11.8″ Long Rubber Mallet Hammer Black Clear Yellow $20.90

OXO Good Grips Meat Tenderizer $11.77 Flat, tenderize, and enhance delicious meats with OXO quality and efficiency. This meat tenderizer is constructed of aluminum, which provides sufficient durability without the added weight of the heavier metals. Featuring a flat side, for pounding, and a textured side, for tenderizing, it is perfect for preparing all manner and styles of meat, be it for complimenting ingredients or stand alone ent…

SoftWorks Meat Tenderizer $11.54 If you’re fond of thin cutlets or like your meat tender as butter, the SoftWorks Meat Tenderizer is the tool for the job–it’s got a flat side for pounding and a textured side for tenderizing. It’s also non-slip under wet or dry conditions. Tenderize beef, pork, chicken and other meats. Use flat or textured side for food prep. Soft-grip ergonomic handle offers comfort and non-slip control. Superi…

TEKTON 3166 16-oz. Fiberglass Rubber Mallet $5.52 Tekton by M.I.T. 16-oz Fiberglass Rubber Mallet features: Double-Faced Solid Rubber Head, 2.25 inch Round Striking Surfaces, Rugged Fiberglass Handle, Cushioned Textured Non-Slip Handle Grip…

SE 5-in-1 Dual Interchangeable Head Hammer $11.99 Dozens of uses at home, work and shop. Multi-functional for woodworking, metal work, arts and crafts, and hobbies. Classic hickory handle preferred by pros; 9 in. handle, 2-1/2 in. head width, 3/4 in. face diameter. Instead of 5 hammers cluttering your workbench, have one hammer with 5 faces! Threaded faces are easy to change, stay secure on aluminum head. Include hard-to-find copper and brass for…

TEKTON 3180 40mm Double-Face Soft Mallet $7.40 MIT DOUBLE-FACE SOFT MALLET features: Two 40mm Diameter Replaceable Heads: Black Rubber Head for a Cushioned Strike, High Impact Plastic Head For a Positive Strike, Rugged Tubular Steel Handle, Cushioned Non-Slip Rubber Handle Grip, Mallet Face Diameter: 40 mm…

Taylor Percussion Reflex Hammer $1.90 i…

Spring Handled Mallet Back Massager …

4 Mallet/Backscratcher Percussive Oriental Massage Tool $15.88 These backscratcher/massagers are cut from mature bamboo, and are very strong and sturdy. The handle is a comfortable handfilling 1 1/2″ wide, and has a rubber ball attached for use as a massage mallet. Used alone, or in pairs, these are great for pounding away stress and soreness from tight muscles. Percussive massage is traditional across the Orient, as well as in Finland and Russia, where it is…

Her Majesty’s Pleasure, 1992 (oil on canvas).. – Mouse Mat Art247 Highest Quality Natural Rubber Mouse Mats – Mouse Mat $12.99 Natural Rubber Mouse MatAll products are produced from the highest quality natural rubber.Heavy Weight Traditional Mousemats actual size: 250 x 190 x 6mmCrop shown is automated for display purposes only. All mousemats are hand finished and the best most appropriate crop will always be selected to best show the full image. Therefore, actual product may vary from crop shown….

The Croquet Match by Gillian Lawson – Mouse Mat Art247 Highest Quality Natural Rubber Mouse Mats – Mouse Mat $12.99 Natural Rubber Mouse MatAll products are produced from the highest quality natural rubber.Heavy Weight Traditional Mousemats actual size: 250 x 190 x 6mmCrop shown is automated for display purposes only. All mousemats are hand finished and the best most appropriate crop will always be selected to best show the full image. Therefore, actual product may vary from crop shown….

Space Solutions 1500 Series 5-shelf Shelving Unit $104.99 This 1500 Series shelving unit features a neutral light grey color and assembles easily in a few minutes with a rubber mallet. This shelving unit is constructed from durable steel and particle board.

Iron Horse Riveted Steel 4-shelf Shelving Unit $82.47 This Iron Horse shelving unit features a neutral black color and assembles easily in a few minutes with a rubber mallet. This shelving unit is constructed from durable steel and particle board.

Iron Horse Riveted Steel 5-shelf Shelving Unit $94.51 This Iron Horse shelving unit features a neutral black color and assembles easily in a few minutes with a rubber mallet. This shelving unit is constructed from durable steel and particle board.

GCD Studios Chip Art Mallet by Melody Ross $11.81 Solid rubber mallet allows you create effects using chipboard pieces. This durable crafting tool works well with other Melody Ross chip art tools. Strong handle makes it easy to wield the mallet as you craft.